SS-1000 Product Description
Download PDF
SS-1000 is a fast curing rubber coating developed for
shock dampening and vibration isolation applications. SS-1000 is
a 2-Part silicone that when cured, allows handling
of the parts within minutes.SS-1000 works well in automatic and manual
dispensing equipment.
Product Features
• Room temperature cure or fast heat cure silicone rubber
• 2-part 1:1 mix
• Pourable and self-leveling
• Temperature range –40 to 260C
Color: Translucent
(custom colors available upon request)
Typical Applications
• Vibration isolation
• Severe impact cushioning
• Shock dampening
Chemical cure system
Platinum catalyzed, addition cure system.
Typical Properties
UNCURED
Viscosity, cps: 100,000
Specific Gravity: 1.05
Consistency mixed: thick liquid
Working time @ R.T.: 15mins.
Cure time @ 150C: 5 minutes
Cure time @ R.T.: 60-120mins.
CURED–
Tensile Strength, PSI >300
Elongation, % >300
Tear Strength, PPI 25
Coefficient of Thermal Expansion
20 x 10 -5
Mixing Instructions
The preferred method of mixing and application of SS-1000 is through a static
mixer at a 1:1 mix ratio by volume.
Handling precautions
This is a Platinum Cure system product. The catalyst can be deactivated by
exposure to sulfur containing compounds like thiols, sulfides, sulfates, organic
rubber containing sulfur, nitrogen containing compounds like amines, amides,
imides, azides, tin metals or compounds, or tin cured RTV’s.
Service temperature
-40 to 260C
Limitations
Do not use product on head gaskets or in solvent or fuel immersion applications.
Allow to fully cure before putting assembly into service.
Packaging
SS-1000 is available in 400 ml. cartridges, 40 lb. pail kits and 400 lb. drum
kits. This product is also available in customer defined packaging sizes,
upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or implied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **