SS-4061 Product Description
Download PDF
SS-4061 is a heat curing silicone RTV developed for encapsulation and conformal coating applications. SS-4061 is a 1-Part silicone that when heated to 150 C, cures in less than 30 minutes forming a tough silicone rubber.
Product Features
- Transparent encapsulant
- Addition cure liquid
- Excellent moldability and conformation to plastic, metal and glass parts
- Convenient 1-Part system
- Fluoresces under UV light for inspection
Typical Applications
- Electronic component vibration
- Shock and thermal insulation
- Dust and moisture protection
- Dielectric and insulation
Chemical cure system
Platinum catalyzed, addition cure system.
Typical Properties
UNCURED
Color Water white, clear
Viscosity, cps 900
Specific Gravity 0.90
Consistency: Self-leveling, light liquid
Pot-life @ R.T.: 12 months
Cure time @ 150 C < 30 minutes
Odor none
CURED
Shore 00 60
Tensile 100 PSI
Elongation 200%
Byproducts none
Shrinkage none
Corrosivity none
Temperature range: -65 to 250C
Application Methods
Apply by: pouring, dipping, brushing, flow-coat, spin-on or spraying.Handling precautions
Avoid contact with tin cured RTV’s, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated
Solids
100% solids, contains no solvents
Adhesion
This product offers primerless adhesion to plastics, metals and typical substrates.
Service temperature
-65 to 250 C continuous
Limitations
Do not use product in solvent or fuel immersion applications. Allow to fully cure before putting assembly into service.
Packaging
SS-4061 is available in a 25 ml syringe, one pound cans, 8 lb. gallon containers and 40 lb. 5 gallon pails. This product is also available in customer defined packaging sizes, upon request.Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area below 70 F.
Applicable standards
Conforms to GM low volatility requirements. Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **