Silicone Gels Product Description
Download PDF
SS-4060, 5060, 6060 and 6080 are room temperature curing silicone RTV gels.
These were developed for applications requiring a fast cure silicone gel product.
All are two part, 1:1 mix ratio silicone that when mixed at room temperature,
cure in 180 minutes, or when exposed to heat results in a cured gel in 15
minutes. When cured, the elastomer resists weathering, ozone, moisture, UV
and high temperatures.
Product Features
Addition cure liquid
Excellent moldability and conformation to plastic, metal and glass parts
Convenient 1:1 mix ratio
Clear silicone rubber
Color: Clear
(custom colors available upon request)
Typical Applications
Clear potting or encapsulation of parts
Electronic component vibration,
shock and thermal insulation
Dust and moisture protection
Dielectric insulation
Chemical cure system
Platinum catalyzed, addition cure system.
Gels, Low Duro Silicone Rubber
Typical Properties
| UNCURED | ||||
| Viscosity, cps | 1,000 |
|||
| Specific Gravity | 0.98 | |||
| Consistency mixed: light liquid | ||||
| Pot-life @ R.T.: | 120 minutes | |||
| Cure time @ R.T.: 180 minutes | ||||
| Cure time @ 150 C 15 minutes | ||||
| CURED | SS4060 | SS5060 | SS6060 | SS6080 |
| Shore A | 30 | 10 | <0 | <0 |
| Shore 00 | 80 | 60 | 1to 2 | <0 |
| Dampening | low | medium | high | very high |
| Penetration | low | low | 60 | 80 |
Mixing Instructions
The preferred method of mixing and application of gels is by using a 1:1 mix
ratio by volume or weight and then degassing. These can also be mixed and
dispensed through automatic equipment.
Depth of cure vs time
Within 30 to 60 minutes, any depth of application filled with this product
will be cured and fully encapsulated.
Handling precautions
Avoid contact with tin cured RTV’s, sulphur compounds, azides, imides,
latex rubber gloves, and amines as cure system can be deactivated
Solids
98% solids, contains no solvents
Adhesion
Peelable & Adhesive versions available. Please specify when ordering.
Service temperature
-65 to 250C continuous
Limitations
Do not use product on head gaskets, or in solvent or fuel immersion applications.
Allow to fully cure before putting assembly into service.
Packaging
These gels are available in 50 ml. dual syringes, one pound kits, 16 lb. kits
and 80 lb. kits. These product are also available in customer defined packaging
sizes, upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Applicable standards
Conforms to GM low volatility requirements.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.