SS-3006S Product Description
Download PDF
SS-3006S is a fast curing, self-leveling adhesive silicone RTV. SS-3006S is
a 2-part RTV that when mixed, applied and cured, results in a silicone adhesive
sealant rubber to be formed within 10 minutes. When cured, the elastomer resists
weathering, ozone, moisture, UV and high temperatures.
Product Features
• Fast deep section, neutral cure
• Self-leveling liquid
• Excellent adhesion and conformation to plastic, metal and glass parts
• Self priming adhesive sealant
Typical Applications
• Coatings applications
• Encapsulating adhesive
• Deep section cure adhesive
Color: Translucent
(custom colors available upon request)
Service temperature
-45 to 250 C continuous
Typical Properties
UNCURED
Viscosity, cps 22,000
Specific Gravity: 1.03
Consistency: self-leveling liquid
Working time @ R.T.: 120 minutes
Cure Time @ 150 C: 10 minutes
CURED - *Download PDF for Electrical Specifications*
150 C 10 minutes
Hardness, Shore A 30
Tensile, PSI 200
Elongation, % 250
CURE SPEED OPTIONS
Standard Fast Very Fast
WORK TIME
@ R.T. >120min 20min 2min
CURE TIME
@ R.T. 24hrs 1.5hrs 15mins
Mixing Instructions
The preferred method of application of SS-3006S is robotically through a static
mixer. The RTV should be held level while the silicone is curing.
Handling precautions
This is a Platinum Cure system product. The catalyst can be deactivated by
exposure to sulfur containing compounds like thiols, sulfides, sulfates, organic
rubber containing sulfur, nitrogen containing compounds like amines, amides,
imides, azides, tin metals or compounds, or tin cured RTV’s.
Depth of cure vs time
Very firm deep section cures are formed with heat in 15 minutes. Ultimate
cured properties are found in 24 hours.
Chemical Cure System
Addition Cure System
Packaging
SS-3006S is available in 400 ml. dual syringes, 8 lb.,40 lb. and 400 lb. kits.
This product is also available in customer defined packaging sizes, upon request.
Solids
>99% solids, contains no solvents
Adhesion
Primerless adhesion to most plastics, metals and typical substrates.
Limitations
Do not use product on automotive head gaskets or fuel immersion applications.
Allow to fully cure before putting assembly into service. Ensure enough product
remains between flanges or parts to be bonded to be effective in an assembly.
Handling and Safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant can irritate eyes and skin. Refer to
MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or implied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace the portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **