SS-3007 Product Description
Download PDF
SS-3007 is a fast curing silicone RTV adhesive rubber developed for bonding
applications requiring fast development of physical properties. SS-3007 is
a 2-Part silicone that when applied to the substrate and cured allows handling
of the bonded assembly within minutes. When cured, the elastomer resists weathering,
ozone, moisture, UV and high temperatures. SS-3007 works well in automatic
dispensing equipment.
Product Features
• Fast room temperature cure
• 2-part 1:1 mix RTV
• Thixotropic
• Temperature range –45 to 250C
Color: Black
(custom colors available upon request)
Typical Applications
• Component bonding
• Gasket fabrication
Chemical cure system
Platinum catalyzed, addition cure system.
Typical Properties
UNCURED
Viscosity, cps: 35,000
Specific Gravity: 1.30
Consistency mixed: thixotropic paste
Working time @ R.T.: 6 minutes
Tack Free Time @ R.T.: 10 minutes
CURED– *Download PDF for Electrical Specifications*
Tensile Strength, PSI 300
Elongation, % 300
Durometer, Shore A 30
Thermal Conductivity
W/m °K 0.0005
Coefficient of Thermal Expansion
20 x 10 -5
CURE SPEED OPTIONS
Standard Fast
WORK TIME
@ R.T. 10min 2min
CURE TIME
@ R.T. 30min 15min
Mixing Instructions
The preferred method of mixing and application of SS-3007 is through a static
mixer at a 1:1 mix ratio by volume.
Handling precautions
This is a Platinum Cure system product. The catalyst can be deactivated by
exposure to sulfur containing compounds like thiols, sulfides, sulfates, organic
rubber containing sulfur, nitrogen containing compounds like amines, amides,
imides, azides, tin metals or compounds, or tin cured RTV’s.
Depth of cure vs time
In 30 minutes, any depth of application filled with this product will be cured
and fully encapsulated
Adhesion
Primerless adhesion to most plastics, metals and typical substrates.
Service temperature
-45 to 250C
Limitations
Do not use product on head gaskets or in solvent or fuel immersion applications.
Allow to fully cure before putting assembly into service.
Packaging
SS-3007 is available in 400 ml. cartridges, 40 lb. pail kits and 400 lb. drum
kits. This product is also available in customer defined packaging sizes,
upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **