SS-3147 Product Description
Download PDF
SS-3147 is a high strength, neutral curing silicone RTV adhesive rubber. This
product was developed for applications requiring fast development of physical
properties and fast unprimed adhesion. SS-3147 is a 1-Part silicone that allows
handling of the bonded assembly within one hour of application to the substrate.
When cured, the elastomer resists weathering, ozone, moisture, UV and high
temperatures. SS-3147 works well in manual and automatic dispensing equipment.
Product Features
Fast R.T. cure
Thixotropic paste
Excellent unprimed adhesion to most plastics, metal and glass
Fast onset of adhesion
Non-corrosive oxime cure
Temperature range -65 to 260C
Color: Translucent
(custom colors available upon request)
Typical Applications
Assembly line adhesive
Component assembly
Industrial adhesive sealant
Cure System
Oxime cure system
Highest Strength Neutral Cure Silicone RTV Adhesive Sealant
Typical Properties
UNCURED
Viscosity, cps 500,000
Specific Gravity 1.11
Consistency : thixotropic paste
Working time, mins. @ R.T.: 8
Tack Free Time, mins. @ R.T.: 15
Application Rate, 90 PSI, g/min. 300
3mm orifice @ 0.6 MPa
CURED - R.T. *Download PDF for Electrical Specifications*
Cured -72 Hrs. @ R.T.
Tensile Strength, PSI 900
Elongation, % 800
Durometer, Shore A 50
Peel Strength, PPI 100
Tear Strength, PLI 100
Method of Application
Dispense sealant onto part and mate parts. Do not squeeze all of the product
out of flange assembly. Allow to cure.
Curing
Cure speed can be accelerated with increased humidity to very rapid cures
exhibiting surprisingly fast adhesion. Typical utilization involves dispensing
in open air with exposure to ambient humidity. This method of application
will result in a room temperature cured elastomer with very high adhesive
properties.
Solids
98% solids, contains no solvents
Adhesion
Primerless adhesion to most plastics, metals and glass
Service temperature
-65 to 260 C
Limitations
Do not use product on head gaskets, solvent or fuel immersion applications.
Allow to fully cure before putting assembly into service. Ensure enough product
remains between flanges to be effective in an assembly.
Packaging
SS-3147 is available in 10.3 oz. cartridges,
40 lb. pails and 400 lb. drums. This product is also available in customer
defined packaging sizes, upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.