SS-433T Product Description
Download PDF
SS-433T is a fast curing silicone RTV adhesive rubber developed for applications
requiring fast development of physical properties and fast unprimed adhesion.
SS-433T is a 1-Part silicone that when applied to the substrate allows handling
of the bonded assembly within an hour. When cured, the elastomer resists weathering,
ozone, moisture, UV and high temperatures. SS-433T works well in manual and
automatic dispensing equipment.
Product Features
• Fast R.T. cure
• Thixotropic paste
• Excellent unprimed adhesion to plastic, metal and glass
• Fast onset of adhesion
• Neutral cure
Typical Applications
• Industrial Bonding
• Assembly line adhesive
• Adhesive Sealant
Color: Translucent
(custom colors available upon request)
Service Temperature
-65 to 260C
Fast Cure Silicone RTV Adhesive Sealant
Typical Properties
UNCURED
Viscosity, cps 100,000
Specific Gravity 1.12
Consistency : light paste
Working time, mins. @ R.T.: 8
Tack Free Time, mins. @ R.T.: 20
CURED - R.T.
Tensile Strength, PSI 450
Elongation, % 350
Durometer, Shore A 30
Peel Strength, PPI 20
Method of Application
Dispense product onto part and mate parts. Be sure not to squeeze all of the
product out of flange assembly. Allow to cure.
Chemical cure system
Oxime cure system
Solids
98% solids, contains no solvents
Curing
Cure speed can be accelerated with increased humidity to very rapid cures
exhibiting surprisingly fast adhesion.
Typical utilization involves dispensing in open air and after exposure to
ambient humidity, a room temperature cured elastomer with high adhesive properties
is formed.
Adhesion
Primerless adhesion to most plastics, metals and typical substrates.
Limitations
Do not use product on head gaskets or fuel immersion applications. Allow to
fully cure before putting assembly into service. Ensure enough product remains
between flanges or bonded parts to be effective in an assembly.
Packaging
SS-433T is available in 10.3 oz. cartridges,
40 lb. pails and 400 lb. drums. This product is also available in customer
defined packaging sizes, upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant can irritate eyes and skin. Refer to
MSDS.
Compatibility
Fully compatible with all materials. Cannot be cure inhibited or contaminated
like addition cure systems.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **