SS-5088 UV Dual Cure Silicone Adhesive Sealant
SS-5088 is a UV dual cure neutral silicone RTV adhesive rubber developed
for UV applications. SS-5088 is a 1-Part silicone that when applied to the
substrate allows handling of the bonded assembly within seconds. When cured,
the elastomer resists weathering, ozone, moisture, UV and high temperatures.
SS-5088 works well in manual and automatic dispensing equipment.
Product Features
• Fast UV cure
• Excellent unprimed adhesion
• Convenient, UV accelerated instant cure capability
• Temperature range –65 to 260C
• Secondary moisture cure for shadow areas
Typical Applications
• Assembly line adhesive
• Form in place gaskets
• Adhesive sealant
Service temperature
-65 to 260C
Typical Properties
UNCURED
Viscosity, cps 70,000
Specific Gravity 1.04
Consistency : heavy liquid
CURED - R.T.
Cured -24 Hrs. @ R.T.
Tensile Strength, PSI 200
Durometer, Shore A 30UV
Accelerated Curing
A short term UV exposure, followed by a secondary moisture cure, results in
cured elastomer exhibiting outstanding adhesion.
Typical UV Lamp Performance
Method of Application
Dispense sealant onto part either manually or robotically. Allow to cure.
Chemical Cure System
UV Acrylic with a secondary Alkoxy moisture cure system
Solids
98% solids, contains no solvents
Curing
Typical utilization involves short term UV exposure followed by a secondary
moisture cure.
Adhesion
Primerless adhesion to most plastics, metals and typical substrates
Limitations
For Maximum Shelf Life Product Must Be Frozen. Do not use product on head gaskets or fuel immersion applications. Allow to
fully cure before putting assembly into service. Ensure enough product remains
between flanges to be effective in an assembly.
Packaging
SS-5088 is available in 10.3 oz. cartridges, 40 lb. pails and 400 lb. drums.
This product is also available in customer defined packaging upon request.
Compatibility
Fully compatible with all materials. Cannot be cure inhibited or contaminated
like addition cure systems.
Handling and Safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **