SS-5699 Product Description
Download PDF
SS-5699 is a silicone RTV adhesive rubber developed for applications requiring
fast development of physical properties and fast unprimed adhesion. SS-5699
is a 1-Part silicone that allows handling of the bonded assembly within one
hour of application to the substrate. When cured, the elastomer resists typical
automotive fluids and high temperatures. SS-5699 works well in manual and
automatic dispensing equipment.
Product Features
• Fast R.T. cure
• Thixotropic paste
• Excellent unprimed adhesion to most plastics, metal and glass
• Non-corrosive oxime cure
• Rapid onset of adhesion
• High temperature resistance
• Temperature range -65 to 260C
Color: Gray
(custom colors available upon request)
Typical Applications
• Form in place gaskets
• Adhesive Sealant
• Automotive assembly and MRO
Chemical cure system
Oxime cure system
Gray Automotive Silicone RTV
Gasket Maker for Import Applications
Typical Properties
UNCURED
Viscosity, cps 500,000
Specific Gravity 1.45
Consistency : thixotropic paste
Working time, mins. @ R.T.: 5
Tack Free Time, mins. @ R.T.: 15
Application Rate 220-550
90PSI, g/min.
3mm orifice @ 0.6 MPa
CURED - R.T.
Cured -24 Hrs. @ R.T.
Tensile Strength, PSI >400
Elongation, % 200
Durometer, Shore A 45
Peel Strength, PPI 40
Tear Strength, PLI 35
Method of Application
Dispense sealant onto part and mate parts. Do not squeeze all the product
out of flange assembly. Allow to cure.
Curing
Typical utilization involves dispensing in open air with exposure to ambient
humidity. This method of application will result in a room temperature cured
elastomer with very high adhesive properties.
Solids
98% solids, contains no solvents
Adhesion
Primerless adhesion to most plastics, metals and glass
Service temperature
-65 to 260C
Limitations
Do not use product on head gaskets or fuel immersion applications. Allow to
fully cure before putting assembly into service. Ensure enough product remains
between flanges to be effective in an assembly.
Packaging
SS-5699 is available in 10.3 oz. cartridges,
50 lb. pails and 500 lb. drums. This product is also available in customer
defined packaging sizes, upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Applicable Standards and O.E.M. part number interchange
• Acura - 08718550030E
• Chrysler - 82300234, 82300235
• Daewoo - AA 1204020
• Ford - WSE-M4G-323-A5
• G.M. - 12346240, 9985943
• Honda - 296380, 296381, 08718-001, HC2963817, 08718-5000040E, 08718-0003
• Hyundai - 231-13800, 4C116-21000
• Isuzu - 1215, 1216, 1207D
• Maxion – 0710129
• Mazda – 77-300C-30
• Mitsubishi – MD997740, MD997110, MD970389, 3M8704, ACH1ZC1X02,
ACH1ZC1X03, 3M8678, 3M8679, 3M8672
• Nissan - 999MPAM003, 999MP-A7007, KPS51000150
• Subaru - 004403007, TB1215, TB1207, TB1217B, 3MT3#08670
• Suzuki – 99104-31140, 99104-31160
• Toyota - 00001-01001, 00001-01002, 00295-00102, 00295-01208, 00295-01282,
00295-01281, 004403007, TB-1215, TB1217B, TB1207, 3MT3#08670
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **