SS-598 Product Description
Download PDF
SS-598 is a fast curing, heavy bodied silicone RTV adhesive rubber. This product
was developed for applications requiring fast development of physical properties
and fast unprimed adhesion. SS-598 is a 1-Part silicone that allows handling
of the bonded assembly within one hour of application to the substrate. When
cured, the elastomer resists typical automotive fluids and high temperatures.
SS-598 works well in manual and automatic dispensing equipment.
Product Features
• Fast R.T. cure
• Thixotropic, heavy bodied paste
• Excellent unprimed adhesion to most plastics, metal and glass
• Non-corrosive oxime cure
• Rapid onset of adhesion
• High temperature resistance
• Temperature range -65 to 260C
Color: Black
(custom colors available upon request)
Typical Applications
• Form in place gaskets
• Adhesive Sealant
• Automotive assembly and MRO
Chemical cure system
Oxime cure system
Heavy Bodied Automotive Silicone RTV Gasket Maker
Typical Properties
UNCURED
Viscosity, cps 700,000
Specific Gravity 1.32
Consistency : thixotropic paste
Working time, mins. @ R.T.: 5
Tack Free Time, mins. @ R.T.: 10
CURED - R.T.
Cured -24 Hrs. @ R.T.
Tensile Strength, PSI >250
Elongation, % >350
Durometer, Shore A 32
Peel Strength, PPI 30
Tear Strength, PLI 30
Method of Application
Dispense sealant onto part and mate parts. Do not squeeze all the product
out of flange assembly. Allow to cure.
Curing
Cure speed can be accelerated with increased humidity to very rapid cures
exhibiting surprisingly fast adhesion. Typical utilization involves dispensing
in open air with exposure to ambient humidity. This method of application
will result in a room temperature cured elastomer with very high adhesive
properties.
Solids
98% solids, contains no solvents
Adhesion
Primerless adhesion to most plastics, metals and glass
Service temperature
-65 to 260C
Limitations
Do not use product on head gaskets or fuel immersion applications. Allow to
fully cure before putting assembly into service. Ensure enough product remains
between flanges to be effective in an assembly.
Packaging
SS-598 is available in 10.3 oz. cartridges, 50 lb. pails and 500 lb. drums.
This product is also available in customer defined packaging sizes, upon request.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Applicable standards and O.E.M. part number interchange
• Chrysler - 4206070, 4318025
• Ford - D6AZ-19562-B, E8AZ-19562-A, WSE-M46320-A2
• G.M. - 9985675, 1052751, 1052917, 12345739
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **