SS-6004 Product Description
SS-6004 is a 1-part silicone RTV developed for conformal coating applications.
SS-6004 offers unprimed adhesion to many metals and plastics. SS-6004 combines
high flexibility with a neutral oxime cure system to provide a durable silicone
adhesive coating.
Product Features
Fast R.T. cure
Self- leveling liquid RTV
Neutral cure
Adhesion to metals and many plastics
Temperature range -65 to 250C
Color: Clear
(custom colors available upon request)
Typical Applications
Conformal coating of assemblies
Industrial sealing
Thin section potting & encapsulation
Self-Leveling
Silicone RTV
Conformal Coating
Typical Properties
UNCURED
Viscosity, cps 10,000
Specific Gravity 1.03
Consistency : low viscosity liquid
Working time, mins. @ R.T.: 10
Tack Free Time, mins. @ R.T.: 20
CURED - R.T. *Download PDF for Electrical Specifications*
Cured -72 Hrs. @ R.T.
Tensile Strength, PSI 200
Elongation, % 300
Durometer, Shore A 25
Method of Application
Dip or dispense coating onto assembly, allow to cure.
Chemical cure system
Oxime cure system
Curing
Cure speed can be accelerated with increased humidity to very rapid cures
exhibiting surprisingly fast adhesion. Typical utilization involves dispensing
in open air and ambient humidity to result in a durable adhesive rubber conformal
coating.
Packaging
SS-6004 is available in 8 lb. containers, 40 lb. pails and 400 lb. drums.
This product is also available in customer defined packaging sizes, upon request
Solids
98% solids, contains no solvents
Adhesion
Primerless adhesion to most metals and many plastics
Service temperature
-65 to 250C
Limitations
Do not use product in a fuel or solvent immersion application. Allow to fully
cure before putting assembly into service.
Handling and safety
For maximum shelf life, keep containers sealed when not in use. Keep out of
the reach of children. Uncured sealant irritates eyes and skin. Refer to MSDS.
Shelf-life
Sealed containers are guaranteed for 1 year from the ship date when stored
in a cool dry area below 70 F.
Limited warranty
All recommendations, statements and technical data herein are based on tests
we believe to be reliable and correct, but accuracy and completeness of said
tests are not guaranteed and are not to be construed as warranty, either expressed
or applied. User shall rely on his own information and tests to determine
suitability of the product for the intended use, and the user assumes all
risk and liability resulting from the use of this product. Manufacturer’s
sole responsibility shall be to replace that portion of product of the manufacturer
proves to be defective. Manufacturer shall not be liable to the buyer or any
third party for injury, loss or damage directly or indirectly resulting from
the use of, or inability to use, the product.
Recommendations or statements other than those contained in a written agreement
signed by an officer of the manufacturer shall not be binding by the manufacturer.
This product has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood
is intended; or for uses which implantation within the human body is intended.
** Customized versions available upon request **